Excavator Arm in Autodesk Inventor 2012

Excavator in Autodesk Inventor 2012

Bus door model in Autodesk Inventor 2012

3D Model of a bus door mechanism.  

Valves and Camshaft work in Autodesk Inventor

V8 Engine Block, Pistons and Crankshaft work in Autodesk Inventor

V8 Engine Animation in Autodesk Inventor

Vratilo – Shaft Autodesk Inventor

Flower 3D Model in Autodesk Inventor and Showcase

Four-bar mechanism in Autodesk Inventor

Four bar mechanism / speeds and accelerations

Speeds and accelerations in the kinematic pair B and the drive bar.  

Industrial Robot 3D Model

Pendulum waves animation + Explanation

How It Works animation of a Pendulum Wave. The animation is simulated in Autodesk Inventor 2013, in Dynamic simulation environment.  

Newton’s Cradle in Autodesk Inventor 2013

Real simulation using Dynamic simulation environment.  

Car Jack in Autodesk Inventor

In this Autodesk Inventor tutorial I’ve created an alloy Rim, globally based on BMW M5 dimensions. I use only common Autodesk Inventor features, so this makes a great model for beginning Autodesk Inventor users. Autodesk Inventor is used for the entire model, in the beginning I’ve placed some renderings from Autodesk Showcase, but as you can see the renderings from Autodesk Inventor itself are very good as well. In fact the ambient shadows in Autodesk Inventor look very good and are very fast to apply to your model. I show how that’s done in the end of the video.  

Robot Gripper Mechanism in SolidWorks 2012

Robot Gripper Mechanism modeled in Solidworks.  

Automatic sorting machine – Mechatronics student project

This machine was created as a project for the subject Construction & CAD, at the Mechanical Engineering faculty in Skopje, by a team of five students.   It is a machine that is sorting two types of plates. One of the plates have holes. Our project was to develop a machine that will sort out these plates automatically. We have came out with this solution, which actually won the first place out of 25 other machines.  

Solidworks and MATLAB / Simulink simulation

In this tutorial you will see how we can make integration of Solidworks and Matlab/ Simulink using the SimMechanics Link. We will make an example of Simulink simulation using a Solidworks 3D model.  

PID Control of Robot Gripper in Matlab / Simulink

PID Control of Robot Gripper in Matlab / Simulink using Solidworks model.  

Simulink and Arduino – Serial Communication

Serial communication between arduino and simulink. I am using the potentiometer to control the position of the cylinder’s piston.  

Simulink and Arduino simulation

Using the Simulink’s Arduino IO library so that Simulink communicates with Arduino through serial port. In this example, two analog inputs (potentiometers) and one digital input (push-button) control the Joints motion of the 3D model which was imported from Solidworks.