Installing USBASP programmer drivers for Windows 7 and above
By Robolab Technologies In Robolab Softwares GuidelinesSelect your operating system to know the detailed procedure
1. Right Click on Start Icon and select Device manager
2.Open “Other devices”
3.Right click on Usbasp and select Update driver software
4.Select “Browse My computer for driver software”
5.Go to the location where you have extracted the zip folder. Downloaded from this link http://www.fischl.de/usbasp/usbasp-windriver.2011-05-28.zip
6.Click next and when you are Prompted with this warning message please click “Install Driver Software Anyway”
7.If everything is correct you will get the following message.
If you guys have any problem please leave a comment below….
Enjoy Programming your Microcontroller………..!
This will be a quick tutorial on how to install Usbasp Programmer on Windows 8 and above.
Since the Usbasp Driver software does not have a proper digital signature we will get an error message like this
So we need to Disable the Digital Signature before we can install the Driver
So here are the Steps.
1)First we need the Driver software.Here is the link to download the software.
http://www.fischl.de/usbasp/usbasp-windriver.2011-05-28.zip
2)Extract the zip file.I prefer to save it in desktop.
3)Now you need to disable the Digital Signature In windows.For that follow these steps
Click on start menu, “Press and Hold” Shift key and then Restart.
This will bring a bunch of options when the computer restarts
4)Click Troubleshoot
5)Click Advanced Option
6)Click Start up Settings
7)Click Restart
8)Select the Option Disable Driver signature enforcement (i.e Pressing F7 here)
9)Now right Click on Start Icon and select Device manager
10)Open “Other devices”
11)Right click on Usbasp and select Update driver software
12)Select “Browse My computer for driver software”
13)Go to the location where you have extracted the zip folder
14) Click next and when you are Prompted with this warning message please click “Install Driver Software Anyway”
15)If everything is correct you will get the following message.
If you guys have any problem please leave a comment below….
Enjoy Programming your Micro controller………..!
yousef raei
thanks so much
Connie
I am trying to install a BL Touch on my ender 3 with a USBasp but when I click write an error message pops up that says “programmer not found. I went online and found a driver and installed it. I went to device manager and checked and now it shows the USBasp under universal serial bus. But when I try to write it says programmer not found still. Can you help?
ignaz
ok @5) extracted WHAT zip ???
John
Well I cannot use your nice instruction, at I cannot find the map, “other devices”, and when placing the USBasp in any of the USB socket, it does not pop up at all.